Mosaic Home Interiors

 

Krea Brochure

Technical Specs

Warranty

Care + Maintenance
Pin it Share on Facebook I love being tweeted Email it

PRODUCT DETAILS

Series: Krea
SKU: 45KREMID416G
Size: 4" x 16"*
Thickness: 7.4 mm
Composition: White Body Wall
Finish: Glossy
Stocked: QuickSHIP:
1-2 days
?

Stock Status:

This product is stocked in our Central Service Center and will deliver in 24-48 hours
Country: Brazil
Sizes listed are approximate. Actual sizes with acceptable variances may be listed in the brochure.

TRIM

  • 1" x 6" Glossy Liner

  • 1/4" x 8" Glossy Pencil Bullnose
For detailed information on trim pieces, click here.

TECHNICAL INFORMATION

Surface Rating: Not Rated
SLIP: Not Applicable ?

HOW IS SLIP MEASURED?

Coefficient of friction (COF) is the measurement of a tile's frictional resistance, closely related to traction and slipperiness. Both static and dynamic measurements can be taken. Static coefficient of friction (SCOF) is the frictional resistance one pushes against when starting in motion. Dynamic coefficient of friction (DCOF) is the frictional resistance one pushes against when already in motion. For SCOF and DCOF, a slip occurs when pushing off with more force than the surface can resist. That can happen when the angle of the force changes (e.g., pushing off harder while pressing down less) or when the floor surface becomes more slippery than anticipated.

While many tile products still show a "COF" value, many manufacturers have stopped reporting coefficient of friction per the ASTM C1028 method because the standard for tile floors has changed. There is now a >0.42 requirement, measured per the DCOF AcuTest℠, for level interior tiles that will be walked on when wet.

Slip Resistance may also be measured using a Pendulum Test.
Class 0: Dry indoor areas only.
Class 1: Dry indoor with slope less than 6 degrees.
Class 2: Wet indoor areas (e.g. bathrooms, kitchen, pool surrounds). Dry indoor areas with slopes or stair steps.
Class 3: Indoor areas where, as well as water, other lubricants are present that can reduce slip resistance (e.g. commercial kitchens, garages, industrial floors, etc.). External areas.
Shade Variation: LOW ?
shade variation rating chart

Shade Variation Rating: LOW

Differences among pieces from the same production run are minimal.”
Eco-Certification Standard ?
The concept of sustainability and "green" building practices has caused significant changes within the commercial and residential construction industry over the past decade. Building green is more than just an environmental buzzword though. In the end, the consumer also benefits from sustainability through less frequent maintenance needs and greater energy efficiency, resulting in lower costs over the life of a building, as well as a healthier indoor environment. When it comes to energy efficiency, durability and other green qualities, ceramic tile is unrivaled as an environmentally-friendly flooring material.

The Advantages of Tile
  • Tile is not an original source of contaminants.
  • Tile does not compromise IAQ during initial installation.
  • Tile will not act as a "sink" to absorb VOCs or other chemicals from surrounding materials. After tile is installed, it forms a completely inert flooring system.
  • Tile will not support bacterial or fungal growth, nor will it absorb or release other contaminants.
  • Tile offers ease of maintenance with simple, water-based cleaning materials.
  • Tile does not require solvent-based cleaners or sealers. Simple, water-based products keep tile well maintained and also protects our environment. Thus, tile offers significant advantages for indoor air quality during installation and for the lifetime of the tile’s use in the building.
FAQs: Click here for Information about Tile

RELATED ITEMS

Items in GREEN are available via QuickSHIP

4" x 16"
(Glossy)

3" x 6"
(Glossy)

4" x 16"
(Glossy Ripple)
Items in GREEN are available via QuickSHIP

4" x 16"
(Glossy)

3" x 6"
(Glossy)

4" x 16"
(Glossy Ripple)

OTHER COLORS


45KREARC416G
(Glossy)

45KREDEE416G
(Glossy)

45KRELUL416G
(Glossy)

45KREMID416G
(Glossy)

45KRESAF416G
(Glossy)

45KRESID416G
(Glossy)

45KRESTO416G
(Glossy)

45KREVAN416G
(Glossy)

45KREARC416G
(Glossy)

45KREDEE416G
(Glossy)

45KRELUL416G
(Glossy)

45KREMID416G
(Glossy)

45KRESAF416G
(Glossy)

45KRESID416G
(Glossy)

45KRESTO416G
(Glossy)

45KREVAN416G
(Glossy)

CATALOGS


Krea Brochure

Technical Specs

Warranty

Care + Maintenance
TRIM

  • 1" x 6" Glossy Liner

  • 1/4" x 8" Glossy Pencil Bullnose
For detailed information on trim pieces, click here.
TECHNICAL INFORMATION
Surface Rating: Not Rated
SLIP: Not Applicable ?

HOW IS SLIP MEASURED?

Coefficient of friction (COF) is the measurement of a tile's frictional resistance, closely related to traction and slipperiness. Both static and dynamic measurements can be taken. Static coefficient of friction (SCOF) is the frictional resistance one pushes against when starting in motion. Dynamic coefficient of friction (DCOF) is the frictional resistance one pushes against when already in motion. For SCOF and DCOF, a slip occurs when pushing off with more force than the surface can resist. That can happen when the angle of the force changes (e.g., pushing off harder while pressing down less) or when the floor surface becomes more slippery than anticipated.

While many tile products still show a "COF" value, many manufacturers have stopped reporting coefficient of friction per the ASTM C1028 method because the standard for tile floors has changed. There is now a >0.42 requirement, measured per the DCOF AcuTest℠, for level interior tiles that will be walked on when wet.

Slip Resistance may also be measured using a Pendulum Test.
Class 0: Dry indoor areas only.
Class 1: Dry indoor with slope less than 6 degrees.
Class 2: Wet indoor areas (e.g. bathrooms, kitchen, pool surrounds). Dry indoor areas with slopes or stair steps.
Class 3: Indoor areas where, as well as water, other lubricants are present that can reduce slip resistance (e.g. commercial kitchens, garages, industrial floors, etc.). External areas.
Shade Variation: LOW ?
shade variation rating chart

Shade Variation Rating: LOW

Differences among pieces from the same production run are minimal.”
Eco-Certification Standard ?

Environmental Rating: Standard

The concept of sustainability and "green" building practices has caused significant changes within the commercial and residential construction industry over the past decade. Building green is more than just an environmental buzzword though. In the end, the consumer also benefits from sustainability through less frequent maintenance needs and greater energy efficiency, resulting in lower costs over the life of a building, as well as a healthier indoor environment. When it comes to energy efficiency, durability and other green qualities, ceramic tile is unrivaled as an environmentally-friendly flooring material.

The Advantages of Tile
  • Tile is not an original source of contaminants.
  • Tile does not compromise IAQ during initial installation.
  • Tile will not act as a "sink" to absorb VOCs or other chemicals from surrounding materials. After tile is installed, it forms a completely inert flooring system.
  • Tile will not support bacterial or fungal growth, nor will it absorb or release other contaminants.
  • Tile offers ease of maintenance with simple, water-based cleaning materials.
  • Tile does not require solvent-based cleaners or sealers. Simple, water-based products keep tile well maintained and also protects our environment. Thus, tile offers significant advantages for indoor air quality during installation and for the lifetime of the tile’s use in the building.
FAQs: Click here for Information about Tile
RELATED ITEMS
Items in GREEN are available via QuickSHIP

4" x 16"
(Glossy)

3" x 6"
(Glossy)

4" x 16"
(Glossy Ripple)
OTHER COLORS

45KREARC416G
(Glossy)

45KREDEE416G
(Glossy)

45KRELUL416G
(Glossy)

45KREMID416G
(Glossy)

45KRESAF416G
(Glossy)

45KRESID416G
(Glossy)

45KRESTO416G
(Glossy)

45KREVAN416G
(Glossy)

Design Center: M - F: 8:00 am - 5:00 pm     •     Sales Counter & Warehouse: M - F: 7:30 am - 4:30 pm
Customer Service Representatives available M - F 8:00 am - 5:00 pm EST
800.828.9265 option 4.
Design Centers M - F: 8:00 am - 5:00 pm
Sales Counter / Warehouse M - F: 7:30 am - 4:30 pm
Customer Service Representatives
available M - F 8:00 am - 5:00 pm EST
800.828.9265 option 4