Mosaic Home Interiors


  Travertine
Colors in this series

03WBT061224

03WBT051224

03WBT041224

03WBT011224
Size and Deco Options
Some options are available via Special Order only

12" x 24"
03WBT011224
(Unpolished)

12" x 24"
03WBT041224
(Unpolished)

12" x 24"
03WBT051224
(Unpolished)

12" x 24"
03WBT061224
(Unpolished)

2" x 2"
03WBT012M
(Unpolished)

2" x 2"
03WBT042M
(Unpolished)

2" x 2"
03WBT052M
(Unpolished)

2" x 2"
03WBT062M
(Unpolished)
Series: Travertine
Composition: Porcelain Stoneware
Shade Variation: MODERATE?
shade variation rating chart

Shade Variation Rating: MODERATE

Clearly distinguishable texture and/or pattern within similar colors.
Look: Stone (Travertine)
Country: USA
Stocked: QuickSHIP:
1-2 days
?

Stock Status:

This product is stocked in our Central Service Center and will deliver in 24-48 hours
Surface Rating: Mohs Scale: 7 ?

Surface Rating: Mohs Scale:7

COF: DCOF Wet .42-.52?

What is COF?

Coefficient of friction (COF) is the measurement of a tile's frictional resistance, closely related to traction and slipperiness. Both static and dynamic measurements can be taken. Static coefficient of friction (SCOF) is the frictional resistance one pushes against when starting in motion. Dynamic coefficient of friction (DCOF) is the frictional resistance one pushes against when already in motion. For SCOF and DCOF, a slip occurs when pushing off with more force than the surface can resist. That can happen when the angle of the force changes (e.g., pushing off harder while pressing down less) or when the floor surface becomes more slippery than anticipated.

While many tile products still show a "COF" value, many manufacturers have stopped reporting coefficient of friction per the ASTM C1028 method because the standard for tile floors has changed. There is now a >0.42 requirement, measured per the DCOF AcuTest℠, for level interior tiles that will be walked on when wet.

Read more about static and dynamic coefficients of friction and the DCOF AcuTest here.
Sizes listed are approximate. Actual sizes with acceptable variances may be listed in the brochure.

Shade Variation may vary by color.
 
"Green Squared® involves one industry, one standard, and one mark and covers the gamut of products used in a tile installation. As the first multi-attribute sustainability standard developed for tiles and tile installation materials, Green Squared uses the transparency and consensus of the ANSI process combined with third party certification to evaluate, validate, and communicate products which have a positive impact on the environment and society.

Green Squared covers product characteristics, manufacturing, end of product life management, progressive corporate governance, and innovation in an effort to establish sustainability criteria for products throughout their full lifecycle.

Developed by the USGBC, LEED (Leadership in Energy and Environmental Design) provides building owners and operators a concise framework for identifying and implementing practical and measurable green building design, construction, operations and maintenance solutions. LEED is an internationally recognized green building certification system, providing third-party verification that a building or community was designed and built using strategies aimed at improving performance across all the metrics that matter most: energy savings, water efficiency, CO2 emissions reduction, improved indoor environmental quality and stewardship of resources and sensitivity to their impacts.

USGBC LEED™ standards dictate that in order for a tile to be considered “green” it must meet one or more of the following requirements:
1. Produced from recycled material which may be either pre-consumer, post-consumer or post-industrial waste
2. Eco-friendly company-production/distribution process in that the manufacturer follows environmentally sound practices
3. Made within 500 miles of the jobsite which saves natural resources to transport the material and therefore reduces the carbon footprint left on our atmosphere

LEED Categories that may apply to products in this catalog:
MR 4.1 – Uses materials with at least 10% recycled content (1 point)
MR 4.2 – Uses materials with at least 20% recycled content (2 points)
MR 5.1 – Uses building materials or products that have been extracted, harvested or recovered, as well as manufactured, within 500 miles of the project site (1 point)"

  • 4" x 24" Unpolished Bullnose
For detailed information on trim pieces, click here.

Travertine Brochure

Warranty

Care + Maintenance

Design Center: M - F: 8:00 am - 5:00 pm     •     Sales Counter & Warehouse: M - F: 7:30 am - 4:30 pm
Customer Service Representatives available M - F 8:00 am - 5:00 pm EST
800.828.9265 option 4.
Design Centers M - F: 8:00 am - 5:00 pm
Sales Counter / Warehouse M - F: 7:30 am - 4:30 pm
Customer Service Representatives
available M - F 8:00 am - 5:00 pm EST
800.828.9265 option 4