Texture Brochure

Texture Technical Information
Pin it Share on Facebook I love being tweeted Email it

PRODUCT DETAILS

Manufacturer: Edimax
Series: Texture
SKU: 78TEXBIA1224
Color: Bianco
Size: 12" x 24"*
Type: Porcelain
Composition: Coloured Body Glazed Porcelain
Finish: Matte
Look: Fabric
Country: Italy
Stocked: QuickSHIP:
48 hours
?

Stock Status:

This product is stocked locally, and will deliver in approximately 2 days.
Sizes listed are approximate. Actual sizes with acceptable variances may be listed in the brochure.

TRIM

  • 3" x 24" Matte Bullnose
For detailed information on trim pieces, click here.

TECHNICAL INFORMATION

COF: Dynamic ≥ .42 ?

What is COF?

Coefficient of friction (COF) is the measurement of a tile's frictional resistance, closely related to traction and slipperiness. Both static and dynamic measurements can be taken. Static coefficient of friction (SCOF) is the frictional resistance one pushes against when starting in motion. Dynamic coefficient of friction (DCOF) is the frictional resistance one pushes against when already in motion. For SCOF and DCOF, a slip occurs when pushing off with more force than the surface can resist. That can happen when the angle of the force changes (e.g., pushing off harder while pressing down less) or when the floor surface becomes more slippery than anticipated.

While many tile products still show a "COF" value, many manufacturers have stopped reporting coefficient of friction per the ASTM C1028 method because the standard for tile floors has changed. There is now a >0.42 requirement, measured per the DCOF AcuTest℠, for level interior tiles that will be walked on when wet.

Read more about static and dynamic coefficients of friction and the DCOF AcuTest here.
Shade Variation: LOW ?
shade variation rating chart

Shade Variation Rating: LOW

Differences among pieces from the same production run are minimal.”
Eco-Certification LEED ?

Environmental Rating: LEED

Developed by the USGBC, LEED (Leadership in Energy and Environmental Design) provides building owners and operators a concise framework for identifying and implementing practical and measurable green building design, construction, operations and maintenance solutions. LEED is an internationally recognized green building certification system, providing third-party verification that a building or community was designed and built using strategies aimed at improving performance across all the metrics that matter most: energy savings, water efficiency, CO2 emissions reduction, improved indoor environmental quality and stewardship of resources and sensitivity to their impacts.

USGBC LEED™ standards dictate that in order for a tile to be considered “green” it must meet one or more of the following requirements:
1. Produced from recycled material which may be either pre-consumer, post-consumer or post-industrial waste
2. Eco-friendly company-production/distribution process in that the manufacturer follows environmentally sound practices
3. Made within 500 miles of the jobsite which saves natural resources to transport the material and therefore reduces the carbon footprint left on our atmosphere

LEED Categories that may apply to products in this catalog:
MR 4.1 – Uses materials with at least 10% recycled content (1 point)
MR 4.2 – Uses materials with at least 20% recycled content (2 points)
MR 5.1 – Uses building materials or products that have been extracted, harvested or recovered, as well as manufactured, within 500 miles of the project site (1 point)
FAQs: Click here for Information about Tile

ADDITIONAL SIZES

Some options are available via Special Order only

12" x 24"
(Matte)

4" x 12"
(Matte)

12" x 24"
(Matte)

4" x 12"
(Matte)

OTHER COLORS


Bianco
(Matte)

Grigio
(Matte)

Bianco
(Matte)

Grigio
(Matte)

CATALOGS


Texture Brochure

Texture Technical Information
TRIM

  • 3" x 24" Matte Bullnose
For detailed information on trim pieces, click here.
TECHNICAL INFORMATION
COF: Dynamic ≥ .42 ?

What is COF?

Coefficient of friction (COF) is the measurement of a tile's frictional resistance, closely related to traction and slipperiness. Both static and dynamic measurements can be taken. Static coefficient of friction (SCOF) is the frictional resistance one pushes against when starting in motion. Dynamic coefficient of friction (DCOF) is the frictional resistance one pushes against when already in motion. For SCOF and DCOF, a slip occurs when pushing off with more force than the surface can resist. That can happen when the angle of the force changes (e.g., pushing off harder while pressing down less) or when the floor surface becomes more slippery than anticipated.

While many tile products still show a "COF" value, many manufacturers have stopped reporting coefficient of friction per the ASTM C1028 method because the standard for tile floors has changed. There is now a >0.42 requirement, measured per the DCOF AcuTest℠, for level interior tiles that will be walked on when wet.

Read more about static and dynamic coefficients of friction and the DCOF AcuTest here.
Shade Variation: LOW ?
shade variation rating chart

Shade Variation Rating: LOW

Differences among pieces from the same production run are minimal.”
Eco-Certification LEED ?

Environmental Rating: LEED

Developed by the USGBC, LEED (Leadership in Energy and Environmental Design) provides building owners and operators a concise framework for identifying and implementing practical and measurable green building design, construction, operations and maintenance solutions. LEED is an internationally recognized green building certification system, providing third-party verification that a building or community was designed and built using strategies aimed at improving performance across all the metrics that matter most: energy savings, water efficiency, CO2 emissions reduction, improved indoor environmental quality and stewardship of resources and sensitivity to their impacts.

USGBC LEED™ standards dictate that in order for a tile to be considered “green” it must meet one or more of the following requirements:
1. Produced from recycled material which may be either pre-consumer, post-consumer or post-industrial waste
2. Eco-friendly company-production/distribution process in that the manufacturer follows environmentally sound practices
3. Made within 500 miles of the jobsite which saves natural resources to transport the material and therefore reduces the carbon footprint left on our atmosphere

LEED Categories that may apply to products in this catalog:
MR 4.1 – Uses materials with at least 10% recycled content (1 point)
MR 4.2 – Uses materials with at least 20% recycled content (2 points)
MR 5.1 – Uses building materials or products that have been extracted, harvested or recovered, as well as manufactured, within 500 miles of the project site (1 point)
FAQs: Click here for Information about Tile
ADDITIONAL SIZES
Some options are available via Special Order only

12" x 24"
(Matte)

4" x 12"
(Matte)
OTHER COLORS

Bianco
(Matte)

Grigio
(Matte)