Astral Plane Brochure

Astral Plane Technical Information
Pin it Share on Facebook I love being tweeted Email it

PRODUCT DETAILS

Manufacturer: Crossville
Series: Astral Plane
SKU: 03AST0224
Color: Magellan
Size: 24" x 24"*
Type: Porcelain
Composition: Porcelain Stoneware
Finish: Unpolished
Look: Stone
Country: USA
Stocked: Domestic:
1 week ETA
?

Stock Status:

This product is stocked in the US, and will deliver in approximately 1 week.
Sizes listed are approximate. Actual sizes with acceptable variances may be listed in the brochure.

TRIM

  • 4" x 24" Unpolished Bullnose

  • 6" x 12" Unpolished Cove Base
For detailed information on trim pieces, click here.

TECHNICAL INFORMATION

COF: Dynamic .42-.52 ?

What is COF?

Coefficient of friction (COF) is the measurement of a tile's frictional resistance, closely related to traction and slipperiness. Both static and dynamic measurements can be taken. Static coefficient of friction (SCOF) is the frictional resistance one pushes against when starting in motion. Dynamic coefficient of friction (DCOF) is the frictional resistance one pushes against when already in motion. For SCOF and DCOF, a slip occurs when pushing off with more force than the surface can resist. That can happen when the angle of the force changes (e.g., pushing off harder while pressing down less) or when the floor surface becomes more slippery than anticipated.

While many tile products still show a "COF" value, many manufacturers have stopped reporting coefficient of friction per the ASTM C1028 method because the standard for tile floors has changed. There is now a >0.42 requirement, measured per the DCOF AcuTest℠, for level interior tiles that will be walked on when wet.

Read more about static and dynamic coefficients of friction and the DCOF AcuTest here.
Shade Variation: HIGH ?
shade variation rating chart

Shade Variation Rating: HIGH

While the colors present on a single piece of tile will be indicative on the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly.”
Eco-Certification 4% G2 by SCS ?

Environmental Rating: 4% G2 by SCS

This tile contains a minimum of 4 percent pre-consumer recycled content and is manufactured by Crossville® using processes that have been certified by Scientific Certification Systems. SCS has verified that through these recycling processes Crossville® recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville® also accepts and recycles reclaimed, previously installed tile through its tile “Take Back” program. For more information, visit CrossvilleInc.com/green.
FAQs: Click here for Information about Tile

ADDITIONAL SIZES

Some options are available via Special Order only

12" x 13"
(Unpolished)

12" x 24"
(Unpolished)

2" x 2"
(Unpolished)

24" x 24"
(Unpolished)

6" x 24"
(Unpolished)

12" x 13"
(Unpolished)

12" x 24"
(Unpolished)

2" x 2"
(Unpolished)

24" x 24"
(Unpolished)

6" x 24"
(Unpolished)

OTHER COLORS


Altair
(Unpolished)

Draco
(Unpolished)

Magellan
(Unpolished)

Pavo
(Unpolished)

Altair
(Unpolished)

Draco
(Unpolished)

Magellan
(Unpolished)

Pavo
(Unpolished)

CATALOGS


Astral Plane Brochure

Astral Plane Technical Information
TRIM

  • 4" x 24" Unpolished Bullnose

  • 6" x 12" Unpolished Cove Base
For detailed information on trim pieces, click here.
TECHNICAL INFORMATION
COF: Dynamic .42-.52 ?

What is COF?

Coefficient of friction (COF) is the measurement of a tile's frictional resistance, closely related to traction and slipperiness. Both static and dynamic measurements can be taken. Static coefficient of friction (SCOF) is the frictional resistance one pushes against when starting in motion. Dynamic coefficient of friction (DCOF) is the frictional resistance one pushes against when already in motion. For SCOF and DCOF, a slip occurs when pushing off with more force than the surface can resist. That can happen when the angle of the force changes (e.g., pushing off harder while pressing down less) or when the floor surface becomes more slippery than anticipated.

While many tile products still show a "COF" value, many manufacturers have stopped reporting coefficient of friction per the ASTM C1028 method because the standard for tile floors has changed. There is now a >0.42 requirement, measured per the DCOF AcuTest℠, for level interior tiles that will be walked on when wet.

Read more about static and dynamic coefficients of friction and the DCOF AcuTest here.
Shade Variation: HIGH ?
shade variation rating chart

Shade Variation Rating: HIGH

While the colors present on a single piece of tile will be indicative on the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly.”
Eco-Certification 4% G2 by SCS ?

Environmental Rating: 4% G2 by SCS

This tile contains a minimum of 4 percent pre-consumer recycled content and is manufactured by Crossville® using processes that have been certified by Scientific Certification Systems. SCS has verified that through these recycling processes Crossville® recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville® also accepts and recycles reclaimed, previously installed tile through its tile “Take Back” program. For more information, visit CrossvilleInc.com/green.
FAQs: Click here for Information about Tile
ADDITIONAL SIZES
Some options are available via Special Order only

12" x 13"
(Unpolished)

12" x 24"
(Unpolished)

2" x 2"
(Unpolished)

24" x 24"
(Unpolished)

6" x 24"
(Unpolished)
OTHER COLORS

Altair
(Unpolished)

Draco
(Unpolished)

Magellan
(Unpolished)

Pavo
(Unpolished)